Salt Water Pump

• Motor protection with or without contactor
• 230V or 400V coil on contactor motor protection

• Protect your pump!
• Electronic or mechanical dry-running protection

Swedish built and tested pump with 2-year warranty.

• "Plug and play" 230V
• Small inner diameter 76 mm
• The market's highest efficiency
• Easy to handle
• Liquid impeller in polycarbonate
• Overheating protection
• Drinking water approved electrical cable

Enjoy the luxury of constant pressure from the water taps.

• Easy installation. "Plug And Play" 1x230V
• Constant pressure from the water taps
• Swedish-made pump with 5 year warranty
• Advanced steering with 3 year warranty
• Drinking water approved cable
• Minimum installation space, 8 liter container
• Fully electronic protection of your facility
• A pump for all depths
• Tested and approved by Franklin Electric

Swedish-made and hand-built pump with 5 year warranty.

• Multi-stage centrifugal pump with radial or semi-axial impellers
• Impeller in Noryl
• Bottom part and suction strainer in stainless steel "SS 2333"
• Cylinder head in stainless steel "SS 2333" with built-in non-return valve
• Liquid impeller in plastic
• NEMA standard
• High efficiency
• Low energy consumption

Swedish built and tested pump with 2-year warranty.

• Check valve built into all 4” pumps
• Flow up to 350 l / min
• Lifting height up to 400 mVp
• Impeller in Noryl
• Bottom part and suction strainer in stainless steel SS2333
• Cylinder head in stainless steel SS2333 with built-in non-return valve
• Floating impeller
• NEMA standard
• High efficiency
• Low energy consumption

Jet pumps for water systems for detached houses, holiday homes, irrigation, etc.

• Self-priming with a maximum suction height of 8m
• Available in 1x230V and 3x400V, stainless steel or cast iron
• Model Cam 100 / RPE is a replacement pump for ring pumps
• Available as a pump dispenser with 20L tank

Swedish built and tested pump with 2-year warranty.

• Check valve built into all 4” pumps
• Flow up to 100l / min
• Impeller in Noryl
• Bottom part and suction strainer in stainless steel "SS2333"
• Cylinder head in stainless steel "SS2333" with built-in non-return valve
• Floating impeller
• NEMA standard
• High efficiency
• Low energy consumption

Enjoy the luxury of constant pressure from your water taps. (For 3" pumps)

• Built-in dry-running protection
• Built-in overheating protection
• Takes up little space
• 8L membrane hydrophore
• Easy installation - "Plug and Play" 1x230V

• Multi-stage centrifugal pumps with a check-valve built into the pressure nozzle
• Impellers and diffusers in Noryl with sealing rings in stainless steel SS2333
• Pump housing, pressure connection, suction inlet, shaft and cable protection made entirely of stainless steel SS2333
• Largest ext. diameter = 140 mm
• Min. borehole diameter = 150 mm
• 3 x 400 V, 50 Hz. Direct start or Y / D soft start

• Pressure pipe connection:
• 611, 614, 621 = G 65
• 627, 636, 648 = G80
• Type DB4 is delivered with a 4” motor

Frequency control developed for 1-phase and 3-phase pumps.

• Pressure transmitter included
• Advantageous during winter shutdown
• ART, automatic reset if the pump has stopped for any reason, Pumpbox tries to restart the pump within a set time interval
• Electrical reset. Should the power supply be lost, Pumpbox will retain all previous settings and resume operation as soon as the power supply is restored
• Protection against dry driving
• Control and protection against overload
• Control and protection against phase loss

• Pump part in cast iron as standard
• Can be offered in other materials on request
• Engines: 4 kW to 150 kW
• Can be delivered for Y / D start from 7.5 kW

Traditional hand pump.

• Hand pump for deep wells. Max depth 39 m
• This traditional hand pump is cast in aluminum and therefore does not rust
• Other parts consist of brass and stainless steel, which gives a superior service life
• The Leijon pump is developed for the Nordic climate, the design makes the pump frost-proof and practically indestructible
• The Leijon pump is supplied with plastic pipes and stainless steel drawbars in 3-meter lengths, this together makes the pump easy to transport and assemble

Newly developed with the market's best efficiency.

• Easy replacement of older pumps
• Simple construction, long-lasting and reliable
• Minimum service requirement
• Can be equipped with all existing ejectors on the market
• Quiet

Drinking water approved electric cable is delivered as standard for Debe's pump package.

• Lowest mounting temp. -25°C
• For pumps without quick coupling
• Incl. shrink tubing spliced to pump and waterproof tape
• Motor cable is included in the pump price

Digital pressure switch for both single-phase and three-phase pumps.

• Available for both 1x230V & 3x400V pumps
• Built-in pressure sensor, dry-running protection and overload protection

Flexible and compact submersible universal pump from Debe.

• Diameter 131 mm
• Easy to assemble
• With built-in start box and level switch start / stop for the single-phase pumps
• The pumps are equipped with 15m cable for 3x400V / 20m for 1x230V
• Maximum mounting depth is 15m. Max. temp. on pumped liquid 35ºC
• Material: Outer casing, suction strainer and shaft made of stainless steel SS2333
• Diffusers and impellers in Noryl